Product Overview

 

Custom injection-molded automotive HVAC air vent housings engineered for passenger compartment climate control systems. These structural enclosures route airflow from the primary ductwork through instrument panels, center consoles, and rear passenger seating vents while housing adjustable louvers, linkage mechanisms, and mounting features.


Manufactured directly to customer engineering drawings, each housing integrates precise mounting tabs, alignment pins, and perimeter sealing surfaces to eliminate air leakage and prevent cabin vibration noise (BSR - Buzz, Squeak, and Rattle). We deliver fully customized solutions--from standalone molded housings to multi-component sub-assemblies pre-fitted with louvers, spring clips, and acoustic foam seals--under direct OEM/ODM contract manufacturing agreements.

 

 
  • Left Side Air Outlet Housing
    Common Materials: PP, ABS, PC+ABSMolding Process: Injection MoldingProduct Size (L × W × D): 160–220 mm × 80–120 mm × 50–70 mmKey Performance: Heat Resistance, Aging Resistance, Impact Resistance
  • Right Side Air Outlet Housing
    Common Materials: PP, ABS, PC+ABS. Molding Process: Injection molding. Product Size (L × W × D): 160–220 mm × 80–120 mm × 50–70 mm. Key Performance: Heat resistance, aging resistance, impact
  • Rear Air Outlet Housing
    Common Materials: PP, ABS, PC+ABS. Molding Process: Injection Molding. Product Size (L × W × D): 150–250 mm × 80–140 mm × 60–100 mm. Key Performance: Heat Resistance, Aging Resistance, Impact
  • Car Air Vent Louver Linkage
    Common Materials: POM, PA66+GF10–20. Molding Process: Injection Molding. Product Size (L × W × Thickness): 60–180 mm × 4.0–8.0 mm × 1.2–2.0 mm. Product Shape: Mostly straight rod; varies depending on
  • Plastic Air Vent Flap Link
    Common Materials: POM, PA66+GF10–20. Molding Process: Injection Molding. Product Size (L × W × Thickness): 25–60 mm × 5–10 mm × 1.5–2.5 mm. Product Shape: Mostly straight rod; shorter than louver
  • Plastic Adjuster Wheel Support Shaft
    Common Materials: POM, PA66+GF10–20. Molding Process: Injection Molding. Product Size (Diameter × Length): Ø3.0–6.0 mm × 10–25 mm. Key Performance: Heat Resistance, Wear Resistance, High Strength
  • Plastic Bevel Gear for Air Vent
    Common Materials: POM, PA66+GF10–20. Molding Process: Injection Molding. Number of Teeth (Z): 10–18. Bevel Angle: 35–55°
  • OEM Plastic Injection Molding
    Clamping Force: 150 tons. Cycle Time: 35 seconds. Dimensional Tolerance: ±0.02 mm. Material Types: PP, ABS, PC, PA66. Mold Steel: S136 hardened
  • Car Interior Plastic Parts
    Material: ABS with UV inhibitor. Surface Gloss: 15% low gloss. Scratch Resistance: 5N load test. Color Stability: 5 years no fade. Operating Range: -30°C to 80°C
  • Automotive Air Vent
    Face Diameter: 65 mm. Rotation: 360 degrees. Louver Travel: 45 degrees each way. Material: PP with 15% glass. Cycle Life: 60,000 operations
  • Polypropylene Automotive Parts
    Material: PP with 30% glass fiber. Max Service Temp: 130°C. Chemical Resistance: Excellent (oil, fuel, coolant). Flame Rating: UL94 V-0. Flexural Modulus: 4,500 MPa
  • Volkswagen Interior Trim
    Vehicle Compatibility: VW 2010-2025. Material: PC+ABS alloy. Color Match: OEM color code. Surface Coating: Soft-touch matte. Clip Type: Rust-proof steel
First 12 Last
 
Materials & Construction

We mold air vent housings using automotive-grade thermoplastics selected for high dimensional stability, low odor, and heat resistance under cabin thermal variations.

Material Specification

Key Engineering Properties

Typical Vehicle Application

PP-TD20 (Talc-Filled Polypropylene)

Low thermal shrinkage, high stiffness, cost-effective

Main instrument panel housing bodies

PC+ABS Alloys

Superior impact strength, tight dimensional tolerance, low VOC

Exposed bezels and decorative vent frames

POM (Polyoxymethylene)

Low coefficient of friction, wear resistance

Louver pivot pins, gear tracks, and sliding links

PA66-GF30 (30% Glass-Filled)

High thermal resistance, structural rigidity

Cowl air intakes & defroster duct connectors

 

Key Structural & Design Features

Reinforced Rib Networks

Optimized wall thickness transitions to eliminate sink marks and prevent part warpage under thermal cycling.

Integrated Snap-Fit Geometry

Formed with strain-relief pockets to ensure reliable engagement during dashboard assembly without brittle fracture.

Alignment & Sealing Features

Precision locating pins and molded perimeter channels designed for die-cut foam gaskets or secondary seals.

 

Manufacturing Process
 

Production takes place in-house using automated injection molding machines ranging from 150T to 450T clamping force, equipped with 3-axis robotic pick-and-place systems for high consistency and cycle efficiency.

Right Side Air Outlet Housing

Precision Tooling & Post-Molding Operations

 

Mold Architecture: Multi-cavity steel molds (H13 / NAK80) engineered with moldflow-optimized gating and side-action core pulls to form complex louver tracks without flash.


Automated Degating & Finishing: Robot-guided runner removal and inline optical inspection.


Secondary Assembly: Ultrasonic welding for multi-piece frame housings, automated spring clip installation, and louver assembly integration.


Surface Treatments: Moldtech (MT) textured finishes for visible bezels and anti-static surface treatments for internal air channels.

 

Customization Options

We provide end-to-end custom contract manufacturing tailored to your program requirements:

Resin Selection

Custom PP, PC/ABS, POM, or PA66-GF formulations compliant with automotive low-VOC, low-odor, and flammability guidelines.

01

Surface Grain & Finish

Moldtech (MT) or VDI surface textures matched to original interior trim specifications.

02

Sub-Assembly Scope

Pre-installed louvers, adjustment linkages, metal spring clips, acoustic sealing foam, or soft-touch overmolding.

03

Tooling Solutions

In-house tool design and fabrication built for high-volume serial production lifecycles (up to 1,000,000 shots) with lifetime tool maintenance.

04

Engineering DFM Assistance

Complete DFM analysis covering draft angle evaluation, gate positioning, parting line optimization, and warpage simulation from native 3D CAD files.

05

 

Quality Control
 

Quality assurance follows strict automotive quality management protocols across all production phases.

Inspection & Verification Capabilities

Dimensional Verification: Critical dimensions, mounting geometries, and pivot hole concentricity are verified on Coordinate Measuring Machines (CMM) and 3D optical scanners against 2D prints.


Visual & Surface Inspection: Automated and manual checks for parting-line flash, sink marks, color consistency, and texture uniformity.


Functional & Fit Testing: Engagement force testing on snap-fit tabs and torque/travel verification on assembled louver linkages.


Environmental & Material Testing: Thermal shock cycling (-40°C to +85°C) and raw material melt flow/density verification.


PPAP Level 3 Documentation: Full quality packages--including Dimensional Reports, Control Plans, Process FMEA, and Material Certification sheets--are submitted for formal sample sign-off prior to mass production.

 

Applications

 

Dashboard Air Vent Housings

Primary driver and passenger climate control enclosures integrated into the main instrument panel.

Center Console Outlets

Rear-seat air distribution housings mounted within center console assemblies.

 

Rear Passenger Duct Enclosures

Dedicated rear seating climate control interfaces mounted in interior trim pillars or floor consoles.

Defroster Register Interface Channels

Windshield defrosting duct interfaces designed for high thermal resistance and airtight sealing.

 

 

Frequently Asked Questions

 

Q: What CAD file formats do you require for a DFM review and quotation?

A: We accept native 3D CAD models in STEP, IGES, or X_T formats, along with 2D drawings in PDF format specifying key tolerances, critical features, and target material specs. Our engineering team provides a detailed DFM report (covering draft angles, moldflow, and gating) and a complete quotation within 24 to 48 hours.

Q: Which plastic materials do you process for automotive air vent housings?

A: We regularly process automotive-grade PP-TD20, PC/ABS, POM, and PA66-GF. All resins meet international automotive environmental, low-VOC, and flammability standards. Material safety data sheets (MSDS) and raw material certifications are provided with initial sample submissions.

Q: Do you design and build injection molds in-house?

A: Yes. We design and manufacture tooling in-house using high-grade hardened steel (such as H13 and NAK80). All molds are maintained under our routine preventive maintenance program to guarantee consistent quality throughout the entire product lifecycle.

Q: What is the typical lead time for prototype tooling and T1 samples?

A: T1 samples from prototype or production tooling are typically delivered within 30 to 45 calendar days following final CAD freeze. Complete PPAP Level 3 documentation is finalized shortly after T1 dimensional approval.

Q: How do you prevent BSR (Buzz, Squeak, and Rattle) and assembly clearance issues?

A: We optimize wall thickness, rib layout, and snap-fit clearances during initial DFM Moldflow simulations. High-precision CNC machining ensures tight tolerances on louver pivot holes, while precision perimeter sealing features prevent micro-movement and air leakage.

Q: What is your Minimum Order Quantity (MOQ)?

A: Our standard production MOQ starts at 2,000 units per production batch. For new automotive program launches, we support lower batch volumes during pre-production development and prototype validation phases.

 

modular-1
Request a Quote / OEM Engineering Inquiry

Ready to evaluate your project? Submit your specifications for an engineering review and DFM report within 24 hours.
To receive a detailed quotation and technical assessment, please provide the following project information:
3D CAD Model: STEP / IGES / X_T
2D Engineering Drawing: PDF (indicating key tolerances and critical control dimensions)
Material Specifications: Resin grade or color requirements
Estimated Annual Volume (EAV): Initial batch quantity and projected volume
Assembly Scope: Standalone housing or sub-assembly with louvers and seals
Upload CAD & Request DFM Review

We are one of the most experienced automotive plastic air vent housing manufacturers and suppliers in China, specialized in providing high quality customized service to global clients. We warmly welcome you to wholesale durable automotive plastic air vent housing in stock here from our factory.

Rear Air Outlet Housing, Left Side Air Outlet Housing, plastic auto parts
Send Inquiry