Custom Precision Automotive Plastic Injection Molded Components
Engineered Contract Manufacturing for Automotive Tier 1 and Tier 2 Supply Chains
Drawing-based custom injection molding, precision tooling development, and full DFM support for functional plastic assemblies.
Quick Highlights for Global Procurement and Engineering Teams
Fast Response: 24 to 48 Hours DFM and Formal Quote
High Precision: +/- 0.05 mm Critical Tolerance (ISO 20457)
Rapid Tooling: 35 to 45 Days Tooling and T1 Samples
IP Protection: 100% NDA Protected Secure CAD Transfer
-
Plastic Side Mirror Trim StripApplication: Exterior side mirror housings, mirror bases. Common Material: ABS. Glossy/Chrome Material: ABS with chrome plating. Painted Material: ABS + automotive paint
-
Plastic Mirror Sound Insulation PadApplication: Installed between side mirror base and door sheet metal, inside mirror housing. Common Material: PP. Thickness: 3 mm, 5 mm, 10 mm (3 mm and 5 mm are most commonly used). Key
-
Mirror GasketApplication: Dashboards, door panels, side mirrors, air ducts, interior and exterior covers, engine bay components. Common Material: EPDM rubber (preferred for aging resistance and sealing
-
Side Mirror Backing PlateApplication: Side mirror mounting structure, door mirror base interior. Common Materials: Modified PP, PP+GF10, ABS. Structural Features: Integrated mounting posts for mirror support bracket,
-
Wing Mirror HousingApplication: Exterior side mirror housing (left and right assemblies). Common Materials: ABS, ABS+PC. Structural Features: Integrated trim strip slot, turn signal lamp opening, internal retainer
-
Radiator Grille CarApplication: Front grille assembly, bumper air vents, HVAC intake vents, fog lamp grilles. Standard Material: Modified PP. Glossy/Chrome Material: ABS, ABS+PC. High Temperature Material: PA66+GF
-
Moulding RadiatorApplication: Front bumper lower lip, fog lamp surrounds, rear bumper side trims, tailgate trims, wheel arch trims. Common Materials: ABS, PP, ABS+PC. Structural Features: Long strip or block-type
-
Bumper Trim PlateApplication: Engine undercover, door trim plates, sill trim plates, fender liners, chassis covers, dashboard side covers. Exterior/Chassis Material: Modified PP, PP + glass fiber, PA66 + GF. Interior
-
Plastic Headlight LensApplication: Front headlights, front fog lights, daytime running lights outer lens. Common Material: PC (polycarbonate). Structure Features: One-piece injection molded structure with retainer seats
-
Tail Light Lens PlasticApplication: Rear tail lights, brake lights, reverse lights, rear fog light outer lens. Common Material: PC (polycarbonate). Structure Features: One-piece injection molded structure with retainer
-
Fuel Filler Door HousingApplication: Body-side fuel filler area. Common Materials: Modified PP, PP + 10% glass fiber (GF10), TPV. Process: Single injection molding or two-shot over-molding. Structure Features: Hinge
-
Fuel Filler Door HingeApplication: Connection between fuel door and fuel filler base. Common Material: PA66 with 20–50% glass fiber (GF20–GF50). Process: Single injection molding or TPV two-shot over-molding. Fixing
Product Overview
We provide custom injection-molded plastic components engineered for automotive fuel delivery systems and engine timing drive assemblies. All parts are manufactured strictly according to customer-supplied 2D engineering drawings, 3D CAD models, material specifications, and validation standards.
Our functional component portfolio includes:
Fuel Filler Neck Protective Caps
Designed for white PP fuel tube assemblies. These covers shield the system from dust, water, and debris during transport and vehicle assembly while maintaining tight snap-fit retention.
Timing Chain Guide Mounting Brackets
Molded rigid structural mounts designed to position and secure timing chain guides or tensioner blades under continuous thermal stress and dynamic mechanical loads.
We partner with global OEMs, Tier 1 and Tier 2 automotive suppliers, and engineering firms requiring application-specific plastic parts for serial production.
Materials and Construction
Material selection is based on operating temperatures, fluid exposure, structural load requirements, and assembly environments:
|
Component |
Target Resin and Compounds |
Key Performance Characteristics |
|
Fuel Filler Neck Protective Cap |
Impact-Modified PP-TD20 or Unfilled PP |
Matched thermal expansion with main PP fuel lines; high resistance to road salt, environmental aging, and impact. |
|
Timing Chain Guide Bracket |
Heat-Stabilized PA66-GF30 or PA66-GF35 |
Continuous temperature resistance up to 150 degrees C; high creep resistance and stability under prolonged engine oil immersion. |
Engineering and Construction Features
Rib and Wall Structure
Optimized rib-to-wall thickness ratios managed via mold flow evaluation to eliminate volumetric sink marks and thermal warpage.
Snap-Fit Latch Geometry
Engineered retention profiles designed to meet exact insertion or extraction force specs and prevent loosening under vibration.
Reinforced Fastening Bosses
Load-bearing mounting holes designed to maintain bolt clamp load under dynamic engine vibration.
Dimensional Contraction Control
Cavity dimensions calculated according to resin-specific shrink rates to ensure precise final part geometry.
Manufacturing Process
Parts are produced in dedicated molding environments using precision electric and servo-hydraulic injection machines (120T to 450T clamping force).
Tooling Engineering and Construction
Molds are constructed using hardened steel cores and cavities (H13 or S136 steel, heat-treated to HRC 48 to 52). Gating, venting, cooling runner layouts, and draft angles are designed to optimize filling balance and weld-line strength.
Process Parameter Control
Closed-loop injection pressure, melt temperature, and mold temperature monitoring ensure low dimensional variation across volume runs.
Post-Molding and Particle Control
Standard post-molding processing includes automated robotic unloading, precise parting-line gate trimming, and ultra-clean deburring. Critical functional surfaces are cleared of loose flash and particulate contamination before packaging.

Customization Options
We support drawing-based manufacturing tailored to OEM specifications:
|
Feature / Category |
Technical Options and Capabilities |
|
3D and 2D File Processing |
Fully compatible with customer 3D CAD (.STEP, .IGES, .X_T) and 2D engineering prints (.PDF with GD&T). |
|
Resin Formulations |
Engineering polymers including PA66, PP, PBT, and POM with custom glass-fiber reinforcement, mineral fillers, or heat/UV stabilizers. |
|
Surface Finishes |
Mold surface finishes from SPI or SPE smooth sealing faces to textured exterior protective housings. |
|
Mounting Integration |
Custom snap profiles, positioning tabs, mounting bosses, and metallic insert molding options. |
|
Visual Poka-Yoke Identification |
Standard automotive black, natural white, or custom masterbatch colors for visual assembly verification. |
|
Tooling Ownership |
Customer-owned steel tooling options with guaranteed mold maintenance coverage throughout the agreed production lifecycle. |
Quality Control and Testing
Inspection and validation protocols adhere strictly to customer quality control plans and technical drawings:
|
Quality Inspection Item |
Verification Method and Standard |
|
Dimensional Verification |
Coordinate Measuring Machines (CMM) and optical measurement systems verify critical tolerances against 3D CAD geometry. |
|
Fit and Functional Testing |
Dedicated checking fixtures evaluate snap-fit retention forces, mounting pitch tolerances, and assembly mating. |
|
Material Verification |
Melt Flow Index (MFI) testing and ash-content analysis verify exact glass-fiber reinforcement ratios against resin datasheets. |
|
Surface and Flash Inspection |
Visual checks and optical inspection verify critical sealing contact zones and blade contact faces to ensure zero permissible flash or burrs. |
|
Pre-Production Documentation |
Sample shipments are supplied with complete CMM dimensional inspection reports, material certificates, and initial process verification records. |
Applications
Fuel Delivery Sub-Systems
Fuel filler neck protective covers for passenger car and light commercial vehicle filler pipe assemblies.
Engine Timing Sub-Systems
Internal combustion engine timing chain drive assemblies, guide rail positioning frames, and tensioner mounting brackets.
Frequently Asked Questions

Request a Quote and Design for Manufacturability (DFM) Review
Submit your engineering files to receive a comprehensive DFM Analysis Report and formal price quotation within 24 to 48 hours.
Our 3-Step Evaluation Process
Submit Engineering Files: Upload your 3D CAD, 2D PDF drawings, resin requirements, and EAU.
Engineering and Molding Review: Our engineering team evaluates wall thickness, draft angles, gate locations, and tooling feasibility.
Quote and DFM Delivery: Receive your detailed DFM feedback report, tooling schedule, and formal price quotation.
We are one of the most experienced automotive plastic parts manufacturers and suppliers in China, specialized in providing high quality customized service to global clients. We warmly welcome you to wholesale durable automotive plastic parts in stock here from our factory.
