Product Overview

 

Plastic door panels serve as primary interior trim modules and structural carriers for automotive door assemblies. Manufactured for Tier 1 suppliers and vehicle OEMs, these components house speaker grilles, armrest supports, window switch bezels, and wire harness channels. We supply injection-molded door panels engineered to strict dimensional tolerances and aesthetic requirements.


Production is executed entirely on a custom OEM/ODM basis using buyer-provided 2D engineering drawings and 3D CAD models. From tooling design to final sub-assembly, panels are delivered batch-tested and ready for direct assembly line integration in passenger, commercial, and off-highway vehicles.

 

 
  • Door Trim Panel Retainer
    Application: Door panels, interior trim, bumpers, fenders, headliners, wire harnesses. Common Materials: PA66 (preferred for door panels and interiors), PA66+GF30 (engine bay and exterior parts), POM
  • Push in Rivet Plastic
    Application: Interior trim, door panels, headliners, bumper trim plates. Common Materials: PA66, PA66+GF30. Fits Hole Diameter: Ø6–8 mm. Fits Panel Thickness: 1–4 mm
  • Expanding Plastic Rivets
    Application: Door inner panels, headliners, soundproofing cotton, bumper trim plates, liners, wire harnesses. Common Materials: PA66. Fits Hole Diameter: 6 mm, 6.3 mm, 7 mm, 8 mm (8 mm is the most
  • Car Door Interior Trim Panel
    Common Materials: Modified PP, PP+EPDM+TD20 (standard formulation). Molding Process: Injection Molding. Length Range: 600–1100 mm. Height Range: 350–600 mm
  • Door Trim Plastic Nut
    Application: Automotive door trim panels, interiors, dashboards, bumpers. Common Materials: Reinforced PA66. Outer Diameter: 6–20 mm. Installation Hole Diameter: Ø6–10 mm
  • Automotive Trim Fastener Clips
    Material: PA66 (Interior first choice), PA66+GF30 (Engine bay/Exterior), POM (High-frequency disassembly), or PP.. Hole Fitment: Ф6-10mm.. Panel Thickness: 1.5-3mm (Interior) / 3-6mm (Exterior)..
  • Nylon Plastic Push Rivets
    Material: High-grade PA66 or PA66+GF30 (Glass fiber reinforced).. Hole Fitment: Ф6-8mm.. Panel Thickness: 1-4mm.. Dimensions: Head Diameter Ф10-18mm.. Performance: Pull-out force ≥80N.
  • Plastic Nut Inserts For Door Trim
    Material: Reinforced PA66 (High-strength).. Dimensions: Outer Diameter 6-20mm; Length 8-22mm.. Fitment: Installation Hole Ф6-10mm.. Performance: Push-in Force 20-50N; Pull-out Force ≥80-150N..
  • Interior Door Garnish Trim Panel
    Material: Modified PP / PP+EPDM+TD20 (Standard automotive grade).. Dimensions (General): Length 600-1100mm; Height 350-600mm.. Thickness: Main wall thickness 2.5-4.0mm.. Hole Fitment: Clip hole
  • Dashboard Central Control Frame
    Material: High-grade PC/ABS or ABS (Low VOC).. Technique: Precision injection molding with integrated clip mounts.. Performance: UV resistant, anti-aging, high impact resistance.. Environment: Low
  • Automotive Mounting Brackets
    Available Materials: ABS, PA66+15% GF, POM. Molding Process: Injection Molding. Structure: Integrated Plastic Support. Key Feature: Multiple Internal Locating Ribs
 
Materials & Construction
 

Materials are selected based on mechanical load, heat deflection, tactile feel, and regulatory standards. We process engineering polymers formulated specifically for automotive interiors:

PP+EPDM-TD20 / TD30

Talc-filled polypropylene offering low thermal expansion, high impact resistance, and minimized warpage.

PC/ABS & ABS

High-rigidity polymers used for structural carriers, switch bezels, and load-bearing trim sections.

Glass-Reinforced Nylon (PA6/PA66-GF)

Utilized for structural mounting brackets requiring high mechanical strength.
Panel architecture incorporates optimized wall thickness (typically 2.2 mm to 3.0 mm) with strategically placed ribbing structures to prevent flexure and thermal distortion. Snap-fit clips, boss towers, and ultrasonic welding ribs are molded directly into the component to streamline vehicle line assembly. Surface finishes range from low-gloss grained textures to leatherette wraps and painted accents.

 

Manufacturing Process

Production utilizes high-tonnage injection molding presses ranging from 800 to 2,800 tons, equipped with multi-axis robotic part-pickers and automated trimming cells:

Mold Design & Simulation

Moldflow analysis determines gate positioning, cooling channel efficiency, and shrinkage allowances.

Precision Injection Molding

Sequential valve gating (SVG) controls melt fronts to eliminate weld lines, balance clamp pressure, and prevent sink marks over thick structural bosses.

Secondary Operations

Automated robotic edge trimming, ultrasonic welding for multi-piece trim attachment, and secondary clip insertion.

Automated Inspection

Vision-system inspection verifies hole alignment, clip presence, and surface integrity prior to final packaging.

 

Plastic Nut Inserts For Door Trim

 

Customization Options

Polymer Formulations
PP+EPDM (TD10/TD20/TD30), PC/ABS, ABS, POM, and flame-retardant grade resins.


Surface Textures
Mold-Tech (MT) graining, high-gloss polished surfaces, soft-touch paint, or film-insert molding (FIM).


Structural Integration
Integrated snap-fits, molded heat-stake bosses, metal insert molding, and acoustic foam damping pads.


Color Matching
Custom color matching aligned with official RAL, Pantone, or customer master color samples.


Manufacturing Scope
DFM analysis, mold design and build (T1 samples in 35 to 45 days), rapid prototyping, and serial production.

 

Quality Control

Dimensional accuracy is verified using Coordinate Measuring Machines (CMM) and 3D optical scanning against native CAD files. Critical mounting points, clip height, and perimeter flushness are evaluated with dedicated checking fixtures (Go/No-Go gauges) matching OEM body-in-white interface geometries.

Inspection Item

Testing Method / Standard

Acceptance Target

Dimensional Accuracy

CMM & 3D Optical Scanning

ISO 2768-mK / Customer Specification

Clip Retention Force

Universal Tensile Testing

Customer Assembly Standard

Coating / Texture Adhesion

Cross-Hatch Tape Adhesion Test

ISO 2409 / Class 0

Thermal Stability

Environmental Chamber (-40°C to +85°C)

No Warpage, Cracking, or Deformation

 

Applications

Passenger Vehicles

Main inner door cards, map pockets, switch panel bezels, and speaker grilles.

Commercial Trucks & Buses

Driver cabin door linings, wall trim panels, and armrest structural bases.

Agricultural & Construction Machinery

Weather-resistant, heavy-duty interior side wall panels for enclosed operator cabs.

 

 

Frequently Asked Questions

 

Q: What CAD formats do you require for Design for Manufacturability (DFM) review?

A: We accept STEP, IGES, X_T, and CATIA files. Our engineering team conducts a DFM analysis within 48 hours, covering draft angles, wall thickness uniformity, gate placement, potential weld lines, and predicted mold shrinkage rates.

Q: How do you prevent warpage and sink marks on large trim panels?

A: We utilize mold flow simulation during tool design to optimize runner layout and sequential valve gate timing. Using talc-reinforced resins (such as PP+EPDM-TD20) along with uniform wall transitions and internal structural ribbing ensures panels maintain flat tolerances post-ejection.

Q: What is your typical tooling lead time and sample approval process?

A: Tooling fabrication takes 35 to 45 days depending on panel complexity and mold size. T1 samples are delivered with a full First Article Inspection Report (FAIR), CMM dimensional data, and material test certifications for buyer sign-off before mass production starts.

Q: What are your Minimum Order Quantities (MOQ) for production runs?

A: Tooling has no MOQ constraints. For serial molding, standard MOQs start at 500 to 1,000 units per production setup to maximize press efficiency and optimize per-unit shipping costs, while initial low-volume ramp-ups are supported.

Q: Can you match exact OEM color and texture standards?

A: Yes. We apply graining specifications directly on the tool core and cavity. Color matching is performed using spectrophotometers to achieve Delta E less than 0.5 against buyer-provided master color samples.

Q: What quality management standards govern your manufacturing process?

A: Our manufacturing operations operate under IATF 16949 and ISO 9001 quality management systems. Production parts comply with REACH and RoHS material safety regulations, and complete PPAP Level 3 documentation is provided upon request.

We are one of the most experienced plastic door panel manufacturers and suppliers in China, specialized in providing high quality customized service to global clients. We warmly welcome you to wholesale durable plastic door panel in stock here from our factory.

plastic door panel, Push in Rivet Plastic, Car Door Interior Trim Panel
Send Inquiry